Buy discount battery for SONY BPU90 camcorder

All the pictures are taken from our real items. Test each BPU90 battery carefully before shipment to ensure its quality and safety. "The satisfaction of customers are our honor" as the eternal quality policy. Thanks for your order!
Click to view more pictures	Why select us? Product ID: 1011340 Battery Type: Li-ion Voltage: 14.4 V Capacity: 6800 mAh Color: black Dimension: 41.50x69.70x93.00mm Property: replacement [?] Condition: New, 12 months warranty

This SONY BPU90 camcorder battery can also replace the following part numbers:

SONY
BP-U30	BPU30	BP-U60
BPU60	BP-U65	BPU65
BP-U95	BPU95	BP-U100
BPU100	BP-U90	BPU90

This SONY BPU90 camcorder battery is also compatible with the following models:

PXW
PXW-X160	PXWX160	PXW-X180
PXWX180	PXW-FS5	PXWFS5
PXW-FS5K	PXWFS5K	PXW-FS5M2
PXWFS5M2	PXW-FS7	PXWFS7
PXW-FS7 II	PXWFS7 II	PXW-FS7K
PXWFS7K	PXW-FS7M2	PXWFS7M2
PXW-FX9	PXWFX9	PXW-FX9K
PXWFX9K	PXW-FX9T	PXWFX9T
PXW-FX9TK	PXWFX9TK	PXW-FX9V
PXWFX9V	PXW-FX9VK	PXWFX9VK
PXW-X200	PXWX200	PXW-Z190
PXWZ190	PXW-Z280	PXWZ280
PMW
Sony PMW-100	Sony PMW100	Sony PMW-160
Sony PMW160	Sony PMW-200	Sony PMW200
Sony PMW-260	Sony PMW260	Sony PMW-280
Sony PMW280	Sony PMW-EX1	Sony PMWEX1
Sony PMW-EX1R	Sony PMWEX1R	Sony PMW-EX3
Sony PMWEX3	Sony PMW-F3	Sony PMWF3
Sony PMW-F3K	Sony PMWF3K	PMW-150
PMW150	PMW-F3L	PMWF3L
PMW-100	PMW100	PMW-160
PMW160	PMW-200	PMW200
PMW-260	PMW260	PMW-280
PMW280	PMW-300K1	PMW300K1
PMW-EX1	PMWEX1	PMW-EX1R
PMWEX1R	PMW-EX3	PMWEX3
PMW-F3	PMWF3	PMW-F3K
PMWF3K

https://www.battery-store.org warranty policy

• Our SONY BPU90 battery are guaranteed to be 100% compatible with your original equipment.
• We use only high quality parts that are equal to or better than the original.
• Our prices are always lower than the brand names.
• Free Return & Exchange.
• 60 Days Money Back.
• 12 Months Warranty.

How to select SONY BPU90 Batteries?

First of all, the physical size is very important. The new SONY BPU90 Batteries must fit the mounting box and brackets of the vehicle. There may be situations where there is more than enough space. However, a new battery should never be too large to fit properly and should be fastened securely in place.

The second is electrical size.Usually, there are two ways to measure the electrical size of a storage SONY BPU90 Batteries. Cold Power Rating or Cold Cranking Amps. This rating indicates the power for starting at low temperatures. It is the amperes of electricity that can be delivered at 0 degrees F. for 30 seconds while the computer battery voltage stays above 7.2 volts. A BPU90 Batteries should be selected according to the engine size of the vehicle. A small four-cylinder engine requires fewer cold cranking amps than a large eight-cylinder engine. Reserve Capacity. This new rating indicates the number of minutes that 25 amperes of electricity can be delivered at 80 degrees F. while the battery voltage is above 10.5 volts. Reserve capacity tells you how much time you will have to keep the engine running when the charging system has failed. The load of 25 amperes is similar to the battery drain from ignition, headlights, and normal accessory use. The more minutes of reserve capacity, the greater the margin of safety.

The third is dry-charged vs wet-charged new computer batteries . A dry-charged battery is stored on the dealer's shelf without electrolyte in it. The dealer must put electrolyte in the SONY BPU90 Batteries and briefly charge it before installation in the vehicle.A wet-charged battery is stored on the shelf with electrolyte already in it. It may require charging before dealer installation. Wet-charged SONY BPU90 Batteries that are stored too long without periodic charging may become permanently damaged.Dry-charged batteries have the advantage of a longer shelf life. Wet-charged batteries are usually ready to go from the dealer's shelf with little or no charging.

In fact, it's no difficult to select a new cheap BPU90 Batteries . Carefully match the requirements of the vehicle to the features provided by the batteries considered. Usually it is a process of placing a value on the available features and making a decision.